百人三公

四列圓柱滾子軸承

四列圓錐滾子軸承四列圓錐滾子軸承工作中可同時承受較大的徑向載荷和雙向軸向載荷。該類軸承廣泛應用在軋鋼機上,一般不需要配備止推軸承。可用于四輥冷、熱帶鋼軋機、中厚板軋機等。因軸承具有可分離性,安裝軸承時要特別注意軸承各零件的安裝順序編號,不可弄混,以免

四列圓柱滾子軸承(圖1)

四列圓錐滾子軸承
四列圓錐滾子軸承工作中可同時承受較大的徑向載荷和雙向軸向載荷。該類軸承廣泛應用在軋鋼機上,一般不需要配備止推軸承。可用于四輥冷、熱帶鋼軋機、中厚板軋機等。因軸承具有可分離性,安裝軸承時要特別注意軸承各零件的安裝順序編號,不可弄混,以免影響軸承的正常使用。
尺寸范圍:φ180—φ1600

Tapered  roller  bearings

   Tapered roller bearing consists of an inner assembly and a detached outer race. The inner assembly includes a inner race of tapered raceway, tapered roller and holder. Each vertex of the raceway face of inner race, the raceway face of outer race and the rolling face of roller is designed to go across a point of bearing central line. The modified line contact between the roller and the raceway can reduce stress centralization. Tapered roller bearing is used mainly to bear combined radial and axial loads with radial load as the dominating element and applied to bear heavy and impact loads. Its load-bearing capacity depends on the contact angle α,i.e. the angle of outer  raceway. The bigger the contact angle, the larger the axial load-bearing capacity. The dimensions of axial play are of great importance to the normal operation of bearings. Too small an axial play will cause a higher temperature rise whereas a larger play will result in possible bearing damage. Special attention shall be paid to the axial play of bearing duiring mounting. Mounting with a shrink range is allowed so as to increase the rigidity of bearings.
   Single row tapered roller bearing can bear radial load and unidirectional axial load. If the bearing bears only radial force, the axial component force resulted from the inside of bearing must be balanced. Therefore, single row tapered roller bearings are generally mounted and used in pair.
   Double-rows tapered roller bearing can bear radial load and bi-directional axial movement of bearing housing within the range of bearing axial play. The performance of four-rows taperded roller bearing is almost similar to that of double-rows tapered roller bearing. It can bear larger radial load but has lower limint revolution. The bearings are mainly used in heavy machinery,especially widely used in steel rolling mills.


澳门线上真人博彩官网 百人三公 澳门赌博平台代理 澳门线上真人博彩官网 pt老虎机注册送礼金